Commercial insulation in Wichita Falls TX - a metal building that doesn't sweat
If your shop roof drips on cool mornings or the office won't hold temperature, we insulate the metal so it stays dry and comfortable.
- Fully licensed and insured.
- Free in-person estimates.
- Replies within 1 business day.
How do you insulate a metal building in Wichita Falls?
For most of our customers, commercial insulation in Wichita Falls, TX, means lining a metal building with fiberglass batts or spray foam, so the inside of the metal stops collecting condensation and the space gets easier to heat and cool.
Maybe the roof drips on cold mornings, the old insulation is hanging in tatters, or you just bought a bare shop and want to use it year-round. The price mostly comes down to the square footage of roof and walls, batts versus spray foam, and whether old wet insulation has to come out first. The schedule turns on the building's size, what's stored inside and whether the job needs a permit. For your own number, I come out, look it over and write up what I found and what we'd do, in plain words.
How can you tell your metal building needs insulation?
Water dripping from the roof
If drops fall from the roof on a cool, clear morning, that's usually condensation, where warm damp air hits the cold underside of the panels. Left alone, it rusts the fasteners and framing and drips on whatever you keep below.
Torn or sagging old insulation
Old batts with ripped facing, or bellies hanging between the framing, usually mean moist air got behind them and the fiberglass soaked up water. Wet batts quit insulating and hold that water against the metal, so the longer they hang there, the more rust you'll find when they come down.
A shop that won't hold temperature
When the office bakes all summer and the shop floor stays cold all winter, bare or thin insulation is usually letting the metal set the temperature inside. Every month like that shows up on the power bill and wears on your heating and cooling equipment.
How we handle commercial insulation on metal buildings
Most of our commercial calls are metal buildings, and on those the big goal is keeping condensation off the metal. I start by walking the building and looking for roof leaks, rust, damaged old insulation and wiring that needs attention, because new insulation over any of that just hides it. Then I lay out fiberglass batts with a proper facing next to spray foam with its fire covering, so you can compare them fairly. Once you pick one, our crew pulls anything wet or ruined, fixes and seals the gaps, installs the insulation, then tapes the facing seams or puts the covering over the foam.
Moisture doesn't stop at the roof. If an office or break room sits over a crawl space, a crawl space vapor barrier keeps ground moisture from working up into the floor. Where a wall or ceiling needs its own moisture control, we can take care of vapor barrier installation as part of the same job.
Fiberglass batts with a reinforced facing
Batts suit a building you can keep dry and want insulated for less money up front. Fiberglass doesn't stop air, so the reinforced facing, usually foil, does the moisture work, and we treat its seams as carefully as the batts themselves.
Spray foam with its fire covering
Foam costs more, but it seals air while it insulates and sticks right to the metal, which suits an owner who plans to keep the building for decades. If that's you, it's the one I'd lean toward.
Get batts and foam priced side by side
Send the form and we'll reply within one business day to set up a free on-site estimate, with no pressure to book. I come out myself, look the building over and write up what I found and what we'd do, in plain words.
(940) 298-1123What changes commercial insulation work in Wichita Falls
The city requires construction work to follow City Codes and carry the correct permits and licenses, and Building Inspections is the office that issues those permits. We ask that office whether your insulation job needs a permit before we start, and when it does, we handle the paperwork and the inspections for you.
The bigger local factor is the air. Wichita County sits in a warm, humid climate zone, so muggy air spends a good part of the year looking for cool metal to settle on. That's why we're picky about a continuous facing or a foam coat with no thin spots at the edges, since the edges are where most jobs get skimped. We see the same metal shops, barns and small commercial buildings on jobs in Burkburnett and Iowa Park. We're based in Wichita Falls and work across the cities around them.
What happens after you call about your metal building?
Call or send the form
Call (940) 298-1123 or fill out the form with a few lines about the building. We'll get back to you and set a time for me to come out.
I look the building over
I check the roof, walls, framing and any old insulation myself, then walk you through what I found and what I'd take care of first. You get it written up in plain words, with batts and foam side by side, so you can see what each one costs before you decide.
We check permits with the city
Once you say go, we check with Building Inspections, which is open Monday to Friday, 8 a.m. to 5 p.m., so we can settle the permit question before work starts. Then we cover and protect your stock and equipment before anyone climbs up.
Seal, insulate and walk through
We do the repairs and sealing first and the insulation second, because that order is what keeps the metal dry. When we're done, I walk the finished job with you and show you what went where.
Frequently asked questions
How much does it cost to insulate a metal building in Wichita Falls?
Across the US, metal building insulation usually costs about $2.50 to $8 per square foot, installed. Where your building lands in that range mostly comes down to the material you pick and how much prep the building needs, such as pulling out old wet batts. I'll give you a figure for your own building once I've seen it.
How long do fiberglass batts and spray foam last in a metal building?
One pricing guide says fiberglass batts last 20 to 30 years if they're kept dry, and spray foam lasts 30-plus years unless it's physically damaged. Keeping batts dry is the part we work on, which is why we fix leaks and seal the facing seams before the batts go up.
Does spray foam insulation need a fire barrier?
Usually, yes. A spray foam trade group says model codes require foam to be covered by a thermal or ignition barrier, unless it passes large-scale fire tests. We count that covering as part of the foam job, so if a foam bid leaves it out, it isn't showing you the full price.
Who issues building permits in Wichita Falls, TX?
Building Inspections at the City of Wichita Falls issues building permits. Commercial plans can go through the city's Electronic Plan Review, where you create an account, fill out the permit application and upload your documents online.
What causes condensation inside a metal building?
It happens when warm, damp air meets the cold underside of the metal, the same way a glass of iced tea sweats on a summer day. It's usually worst where there's no insulation at all, or where old batts have torn facing that lets moist air slip through to the panels.
Does the R-value on the label tell you how metal building insulation will perform?
Not completely, because the R-value, the number for how well insulation slows heat, is measured on the insulation by itself. One industry specification says its R-values don't account for facings, for batts squeezed tight over the framing, or for heat traveling through metal fasteners. It's fair to ask any contractor how the finished job will perform, and I'll point out where those weak spots are on your building.
Wichita Falls, TX
Book a walk-through of your building
Have the building type, a rough roof and wall size and whatever insulation is up there now handy when you call, and we can talk it through on that first call.